![]() ![]() Note: 1) The front-end camera encoding setting of the NVR connected to the ONVIF protocol will prompt that it is not configured, which is caused by the modification not supported.Ģ) Our NVR only supports the ONVIF notify motion detection method. Motion detection has been tested by Dahua, Xiangfei, Haikang, The version needs to be supported after 2014.07) 3 Which remote IPC functions can be realized by NVR linkage IPCġ-Professional NVR connection IPC is connected through NETIP, which can realize coding settings, image colors, network configuration, IPC-enabled alarm functions, audio, PTZ, time synchronization, and automatic networking IPC and NVR need to turn on the alarm function synchronouslyĢ-Professional NVR connects to IPC through onvif protocol, only supports motion detection alarm, audio, PTZ, video, and time synchronization (NVR now supports universal onvif notify method. In other modes, the screen can be dragged. Drag is not supported when this mode is selected. The performance of the device is limited. ![]() 2- Install the upgrade tool through the PC to determine whether the IPC network is normalģ-Determine whether the IP addresses of NVR and IPC are in conflict, need to use a local area networkĤ-Whether NVR and IPC are connected under the same routerĥ-Connect the IPC of the camera directly to the NVR of the recorder, without switching or router, try to searchĦ-Is it possible to find if you try to change the router or switchħ-If it still cannot be solved, contact Xiongmai Technology 2 32-channel NVR cannot be dragged in 32-channel 960P mode
0 Comments
Leave a Reply. |